Troubleshooting
PROBLEM | CAUSE | CORRECTION |
|
|
|
Slide fails to drop into projection | Tray base plate not properly indexed | Align the index hole and index |
position |
| notch. |
|
|
|
| Tray not properly positioned on | Reposition tray on projector. |
| projector |
|
|
|
|
| Slide mount warped or frayed at | Straighten mount or remount |
| corners slide. | slide. |
|
|
|
| Projector not level or tilted too high | Set projector on a stand equal |
|
| with center of screen. |
|
|
|
Uneven illumination on screen | Projection lamp not fully seated | Check lamp. |
|
|
|
| Condenser lens not installed or not | Check condenser lens. |
| positioned properly in mount |
|
|
|
|
| Slide mount not seated properly in | Check slide position and slide- |
| projector gate | mount condition. |
|
|
|
Projector won't cycle to next slide | Tray not properly positioned | Reposition tray. |
|
|
|
| Slide or foreign object stuck in gate | See "Clearing a Gate Jam" on |
|
| page 17. |
|
|
|
27 | KODAK CAROUSEL® Slide Projector |
