Manuals / Kodak / Computer Equipment / Projector

Kodak Slide Projector manual Operation

Models: Slide Projector

1 34

Download 34 pages 63.85 Kb

Page 10

Image 10

Operation

Adding Your Slides Remove the lock ring by turning it counterclockwise and lifting it off.

Check each slide’s orientation (horizontal or vertical), and arrange them in the order you wish to show them. Then turn the slides upside down.

Number each mount in the upper right-hand corner of the film’s shiny side.

Insert your first slide into the first slot in the tray so that the number is visible on the outer circumference of the tray. Insert your second slide in the second slot with the emulsion (dull side) facing your ﬁrst slide, and so on.

6	KODAK CAROUSEL® Slide Projector

Page 10

Image 10

Kodak Slide Projector Operation, Adding Your Slides Remove the lock ring by turning it counterclockwise and lifting it off

Contents

KODAK CAROUSEL Slide Projector CONSUMER IMAGINGOperating Manual Important Safety Instructions Save These InstructionsKODAK CAROUSEL Slide Projector Operating ManualPage Contents Introduction Congratulations IntroductionKODAK CAROUSEL Slide Projector BACK RIGHT OverviewFRONT RIGHT BASEStartup OperationOperation 140-Slide Tray Loading the Slide TrayOperation 80-Slide TrayOperation Adding Your Slides Remove the lock ring by turning it counterclockwise and lifting it offReplace the lock ring by turning it clockwise until it is secure TrayOperation gate index. The tray will drop into positionalign the tray index bar with the gate index press the select bar all the way downOperation KODAK CAROUSEL Slide ProjectorLamp Projecting Your SlidesLens OperationOperation Forward and Reverse Focus Autofocus Models 4400 and 5600 onlyrotate the tray to the desired slide, and release the select bar press and hold down the select barScreen Image Timer Models 4400 and 5600 only OperationReading Light Model 5600 only Room Light Outlet Model 5600 only OperationSingle Slides Selecting Slide Projection Lenses OperationOperation Lens Focal Length/ Projector DistanceChoosing a Curved- or Flat-Field Lens A ﬂat-ﬁeld lens works best forOperation KODAK CAROUSEL Slide ProjectorAdding a Slide Editing Your PresentationRemoving the Lock Ring OperationClearing a Gate Jam OperationOpening the Viewer Using the Built-In Viewer Model 5600 OnlyRemoving the Lens OperationOperation ShutdownReinserting the Lens KODAK CAROUSEL Slide ProjectorProjection Lamps MaintenanceLamp Tips Maintenance Changing the Projection Lampthe lamp module Cleaning the Condenser, Heat-Absorbing Glass, and Mirror MaintenanceMaintenance Glassglass Reassembling the Lamp Module MaintenanceWhen your maintenance is complete, push the lamp module back into the Mirrorthe mirror with a soft, lint-free cloth moistened with lens cleaner MaintenanceKODAK CAROUSEL Slide Projector TroubleshootingPROBLEM CAUSEKODAK CAROUSEL Slide Projector TroubleshootingPROBLEM CAUSEWarranty WarrantyLimitations Your Rights Under State Law Warranty service will not be provided without dated proof of purchaseShipping Instructions How to Obtain ServiceAssistance Projector, contact the Kodak Information Center atConsumer Imaging EASTMAN KODAK COMPANY Rochester, New York CONSUMER IMAGINGKodak, Ektagraphic, and Kodalux are trademarks