| 1 |
| 3 |
|
| 12 kW Carburetor Heater |
|
|
|
| GM19463 |
| 1 | 2 | 3 |
|
|
| GM57968 |
|
| 17/18 kW Carburetor Heater |
|
1. | Thermostat |
|
|
2. | Connector |
|
|
3. | Heater |
|
|
Figure 1-26 Carburetor Heaters
1.11 Prestart Installation Check
Review the entire installation section. Inspect all wiring and connections to verify that the generator set is ready for operation. Check all items in the following Prestart Checklist.
Prestart Checklist
Air Cleaner. Check that a clean air cleaner element is installed to prevent unfiltered air from entering the engine. See the generator set Operation Manual for instructions.
Air Inlets. Check for clean and unobstructed air inlets.
Battery. Check for tight battery connections. Consult the battery manufacturer’s instructions regarding battery care and maintenance.
Exhaust System. Check for exhaust leaks and blockages. Check the muffler condition.
DInspect the exhaust system components for cracks, leaks, and corrosion. Check for tight exhaust system connections.
DCheck for corroded or broken metal parts and replace them as needed.
Oil Level. Maintain the oil level at or near, not over, the full mark on the dipstick.
Operating Area. Check for obstructions that could block the flow of cooling air. Keep the air intake area clean. Do not leave rags, tools, or debris on or near the generator set.
1.12 Startup Notification
Complete the startup and installation checklists supplied with the startup notification form. Complete and sign the startup notification form and return copies to Kohler Co. and the distributor/dealer as instructed on the form.
Standby systems not registered within 60 days of startup are automatically registered using the manufacturer’s ship date as the startup date.
DCheck that the exhaust outlet is unobstructed.
Section 1 Installation 27 |
