3Before making copies
3-38 bizhub 162/210
Copying onto manually fed paper by multi bypass tray
1Position the documents.
For details refer to “Loading the document” on page 4-10.
2Adjust the bypass tray extender and
the paper guides to fit the size of the
paper.
3Load the paper with the front side
facing down, lightly sliding the paper
as much as possible into the feed
slot.
The manual bypass mark ( ) ap-
pears in the bottom line of the
screen.
?Are sheets of cards or postcards loaded?
%Make sure that they are not curled (rolled).
4Check that YES/NO appears in the
bottom line of the screen, and then
press the [No/C] key.
YES/NO is displayed for approxi-
mately 5 seconds after paper is load-
ed into the multi bypass tray. The
paper source setup menu appears.
5Press the [*] and [)] keys to select
the type of paper loaded.
Select from the following four paper
type settings.
PLAIN
OHP
CARD
ENVELOPE
6Press the [Yes] key.
The paper size menu appears.