Utility Mode Operations 7
Di2510/Di3010/Di3510 7-17
To set the “LCD Back-light Off” function
This function is used to specify when the backlight for the touch panel
automatically goes off after no operation is performed for the set length of
time.
1Press the [Utility] key.
2Touch [User’s Choice].
3Touch [3/6], and then touch [LCD
Back-light Off].
4Press the [C] key to erase the value.
HUse the 10-Key Pad to specify
the desired length of time, and
then touch [Enter].
(Specify a length of time
between 1 and 240 minutes.)
Tip
If the preheat and sleep settings are short because of the LCD
Back-light being set to off, then the Backlight will be turned off after
the specified preheat or sleep time.
5Touch [END] to return to the Utility screen, and then touch [Exit] to
return to the Basics screen.