5Basic Copy Operations
5-4 Di2510/Di3010/Di3510
5.3 Interrupting a Copy Job
The current copy job can be paused so that a copy of a different document
can be made.
This is convenient if you wish to quickly make copies of a short document
while a large job is being printed.
Note
If certain functions are specified, it may not be possible to interrupt the
copy job. In addition, some functions are not available while a copy job
is interrupted.
The copier will not enter Interrupt mode (pause copying by pressing
the [Interrupt] key) while a document is being scanned.
For details, refer to the “Function Combination Table” on page 14-11.
To interrupt copying
1Press the [Interrupt] key while a job
is being printed.
HThe indicator on the [Interrupt]
key lights up.
HThe message “Now in the interrupt mode.” appears.
HThe copy settings return to their defaults.
(The copy settings of the job before the interruption and the
remaining number of copies are recorded.)
HIf no operation is performed for one minute after the [Interrupt] key
is pressed, the Interrupt mode is automatically cancelled.
2Position the document(s) to be copied.
3Select the desired copy settings.
4Press the [Start] key.
HScanning of the document begins.
5When the interrupt mode copy has completed, press the [Interrupt]
key.
The indicator on the [Interrupt] key goes off and the Interrupt mode is
cancelled.
The copy settings for the job before copying was interrupted appear,
and copying of the job that was interrupted automatically continues.