4Before Making Copies
4-12 Di2510/Di3010/Di3510
4.5 Turning the Copier On and Off
To turn on the copier
1Set the power switch to “I”.
2Make sure that the sub power
switch has been pressed in.
When the copier is turned on
§A few seconds after the copier is turned on, the message “Now
warming-up. Ready to scan.” appears in the touch panel and the
indicator on the [Start] lights up in green. When the indicator on the
[Start] key lights up in green, a job can be queued.
When the power switch is on, and the sub power switch is in the off
position, copies can not be taken.
ON
OFF