2Safety Information
2-10 Di2510/Di3010/Di3510
2.6 Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the
copier in a location that meets the following requirements.
-A location away from curtains, etc. that may catch fire and burn easily
-A location that is not exposed to water or other liquids
-A location free from direct sunlight
-A location out of the direct airflow of an air conditioner or heater, and
not exposed to extremely high or low temperatures
-A well-ventilated location
-A location that is not exposed to high humidity
-A location that is not extremely dusty
-A location not subjected to undue vibrations
-A stable and level location
-A location where ammonia or other organic gases are not generated
-A location that does not put the operator in the direct airflow of exhaust
from the copier
-A location that is not near any kind of heating devices
Power Source
The power source requirements are as follows.
GVoltage fluctuation: Maximum ±10%
GFrequency fluctuation: Maximum ±0.3 Hz
HUse a power source with as little voltage or frequency fluctuations as
possible.