STRAP4 Pass the tip of the strap through the buckle and pull to tighten.

• Leave some slack in the camera strap(A) so the tip may be threaded through the buckle easily.

5 Push the holder ring toward the strap eyelet to secure the strap to the camera.

• Repeat with the other end of the camera strap.

• Take care not to catch the strap when closing the back cover.

Using the Eyepiece Cap

The eyepiece cap is used to prevent light from entering the camera during time exposures (buLb, p. 79) or when using the self-timer (p. 46). Light entering through the viewfinder can affect the metered exposure.

Firmly press the eyepiece cap of the strap into the eyepiece.

BATTERIES

GETTING STARTED

 

Installing the Batteries

 

Your camera uses two 3V CR2 lithium batteries to supply power for all camera operations.

1

Slide the battery-chamber

release as shown, and open

the door.

 

 

 

 

 

2

Insert the batteries. Match the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

positive terminal mark inside

 

 

 

 

 

 

the battery chamber-door with

 

 

 

 

 

 

the positive end of the

 

 

 

 

 

 

batteries.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Close the battery-chamber

 

 

 

 

 

 

door and push until it clicks.

•When changing batteries, make sure the main switch is off.

•Setting the camera down with the battery-chamber door open may damage the camera.

•For owners of the quartz-date model, The clock and calendar are powered by the camera’s batteries. If the batteries are removed, and the date and time will reset, date imprinting function will be disabled. To store the date and time when changing batteries, see page 21.

•Read “FOR PROPER AND SAFE USE” (p.7)before using batteries.

18

19