Konica Minolta DYNAX 3, DYNAX 4, MAXXUM 4 GETTING, STARTED, STRAP, the ring, eyelet from below, Attaching the Strap, through the camera’s strap, on the inside of the holder, 2 Pass the tip of the strap

GETTING

STARTED

This section provides the information necessary to prepare the camera for use.

Strap (p.17)

Batteries (p.19) Film (p.23) Lens (p.22)

STRAP	GETTING STARTED
Attaching the Strap
Holder	1 With the visible protrusions
Ring	on the inside of the holder
	ring oriented as shown, pass
	the tip of the strap through
Protru	the ring.
sions
	2 Pass the tip of the strap
	through the camera’s strap
	eyelet from below.

•Attach the strap so the tip comes

between the strap and the camera.

3 Pass the tip of the strap through the holder ring.

• Use the following method if the ring is tight for the tip.

1) Fold the strap, and slide the holder ring over the tip.

2) Hold the strap, and slide the holder ring in the direction shown.

1) 2)

16 17