CUSTOM FUNCTIONSResetting All of the Custom Functions to Default

You can reset all of the custom functions to their default settings (1).

1 Turn the main switch to OFF.2 Turn the function dial to CUST.

3

While pressing the function button, slide the main

switch from OFF to ON.

 

When the camera turns on,

will blink

 

on the data panel while the function button

 

is pressed.

 

Custom 1 - AF / Shutter-release Priority

(1) AF priority

Shutter will not release until or appears in the viewfinder.

(2) Shutter-release Priority

Shutter releases even if the focus cannot be confirmed. Use shutter- release priority when photographing moving subjects.

When continuous-advance mode is selected, the camera will not update the focus while the shutter-release button is pressed.

Custom 2 - Film Rewind Start

(1) Automatic

Film is automatically rewound at the end of the roll.

(2) Manual

The manual-rewind button must be pressed to initiate rewind (p. 26).

Custom 3 - Film Tip

(1) Film Tip Rewound

Film is completely rewound into the cartridge.

(2) Film Tip Left Out

The film leader is exposed after rewind.

Sliding the main switch to OFF during rewinding causes the film tip to be rewound into the cartridge when the camera is turned on again.

Custom 4 - DX Memory

(1) DX Memory Off

Film speed is always set to the DX-coded ISO of the film. Non-DX-coded film is set to the ISO of the previous DX-coded roll.

(2) DX Memory On

Manual changes to the film speed of a DX-coded film are saved and applied to future rolls with the same DX-coded ISO. Use when a particular film is consistently pushed or pulled in its processing.

• For setting the film speed manually, see page 84.

CUSTOM

FUNCTIONS

Custom 5 - Shutter-release Lock (Film)

(1) Shutter-release Lock Off

Shutter can be released even if there is no film in the camera.

(2) Shutter-release Lock On

Shutter cannot be released unless film is loaded.

When film is not loaded, if the shutter-release button is pressed all the way down, 0 will blink in the viewfinder and on the data panel.

While the back cover is open, the shutter can be released.

106

107