FOR OWNERS OF THE QUARTZ DATE MODEL

The quartz-date function lets you record the date or time on the lower-left corner of the photograph. The quartz date back has an automatic calendar through the year 2039.

•Imprinted data may be difficult to read if the lower-left corner of the photograph is bright or non-uniform.

•Do not use the data back when temperatures are outside the range of 0° to 50°C (32° to 122°F).

•Since the date is recorded when the film is advanced to the next frame, sometimes the last frame of the roll will not have the date printed on it.

Date button

Select button

 

Setting the Date or Time

1 Press the date button.

2 Press the select button (SEL)

to select the year, month, day, hour, or minute.

• The item that can be changed will blink.

• The data back has a 24-hour clock. 2pm should be set as 14:00.

• The item will cycle as follows.

Year Month Day Hour Minute

3 Turn the control dial to change the date and time values.

• Data continues changing as long as the dial turns.

4 Repeat steps 2 and 3 until

Control Dialthe date and time are displayed correctly.

5 Press the shutter-release button to set the date and time.

• The usual display will return.

•The current date and time are stored in a memory register each time the camera is turned on or off. This feature saves time resetting the clock and calendar when changing batteries, see page 21.

Imprinting the Date or Time

•

The display changes as follows:

DETAILED OPERATION

1

Press the date button to

 

choose the date imprinting format.

2 Press the shutter-release button to set the format.

100

101