WIRELESS/REMOTE FLASH

2

Wait until both flash units are fully

charged.

• appears in the viewfinder when the built-in flash is charged.

•When the wireless/remote flash is charged, on the rear of the flash is lit.

• Pressing the spot-AE lock button will test fire the accessory flash. If the accessory flash does not fire, change its position.

•To test fire the accessory flash, custom 10 should be set to 1 (p.110).

3

Press the shutter-release button all the way down to

take the picture.
Canceling Wireless/Remote Flash Mode1 Attachera. the flash to the cam-

• The camera and flash should be on.

2 Turn the function dial to .
3 While pressing the function

 

button, turn the control dial

DETAILED OPERATION

until

and

appear

 

on the camera’s data panel.4 Detach the accessory flash.

•Turning off the main switch of the camera with the accessory flash attached also cancels wireless flash. If the flash is not attached, the flash’s wireless/remote function will not be canceled. If this happens, see the flash’s instruction manual to cancel the function.

98

99