Konica Minolta DYNAX 3, DYNAX 4, MAXXUM 4 CUSTOM FUNCTIONS, Setting Custom Functions, position other than CUST, While pressing the function, button, turn the control dial

CUSTOM FUNCTIONS

	Function		Setting
Cust	AF / Shutter-	1	AF Priority	106
1	release Priority	2	Shutter-release Priority
Cust	Film Rewind Start	1	Automatic	106
2		2	Manual
Cust	Film Tip	1	Film Tip Rewound	107
3		2	Film Tip Left Out
Cust	DX Memory	1	DX Memory Off	107
4		2	DX Memory On
Cust	Shutter-release	1	Shutter-release Lock Off	107
5	Lock (Film)	2	Shutter-release Lock On
Cust	Focus-hold	1	Focus Hold	108
6	Button (Lens)	2	Continuous Autofocus
Cust	AF Illuminator	1	AF Illuminator On	108
7	(built-in flash)	2	AF Illuminator Off
Cust		1	Normal P Mode
	P Mode Settings	2	PA Mode	109
8
		3	Ps Mode
Cust	Spot AF Lock	1	Select Spot Focus Area
		2	Select Focus Area	109
9	Button
		3	Switch Between the Wide Focus And Spot Focus
Cust	Spot-AE Lock	1	Hold to Activate	110
10	Button	2	Press Once to Activate, Press Again to Cancel
Cust	Flash Metering	1	ADI Flash Metering	111
11
		2	TTL Flash Metering
Cust	Shutter-release	1	Shutter cannot be released if a lens is not attached.	112
12	Lock (Lens)	2	Shutter can be released if a lens is not attached.

Using the custom functions, you can tailor camera settings to suit your shooting style or preferences. Initially all the custom functions are set to 1. The functions are explained on pages 106 - 112.

Setting Custom Functions1 Turn the function dial to CUST.2 Turn the control dial to select the custom function number to be changed.

3	While pressing the function
	button, turn the control dial
	to select the desired setting.
4	Turn the function dial to any
		CUSTOM	FUNCTIONS
	position other than CUST.
•	If the function dial is set to CUST,
	the camera can take photographs,
	but all buttons and switches, except
	for the shutter-release button, are
	disabled.

•Custom settings must be reset manually, and are not effected by the program-reset button or by turning the camera off.

104 105