QUICK OPERATION

1

2

Insert batteries.

•This camera uses two CR2 lithium

batteries.p.19

Attach the lens.

•Align the red mounting index on the lens with the one on the camera. Carefully insert the lens into the mount and turn it clockwise until it clicks into

the locked position.

p.22

5 Set full-auto operation.

•Press the program-reset button to set the camera to fully automatic

operation.p.30

6

Center your subject in the
wide focus frame

. If using

 

a zoom lens, rotate the

 

zooming ring to frame your
subject as desired.

• The camera will focus and set exposure automatically when the shutter release button is pressed

3 Slide the main switch to ON.

4

Load the film.

• Align the film tip with the red mark,

then close the back cover.

p.23

partway down.

p.28

• The audio signal confirms the camera has focused when the shutter release button is pressed partway down.

p.29

 

 

 

7 Whenor appears in the

 

 

 

 

 

 

viewfinder, press the shutter-

 

 

 

 

 

 

release button all the way

 

 

 

down to take the picture.

 

 

 

• Use focus lock if your subject is off-

 

 

 

center and outside the focus frame.

 

 

 

 

p.32

 

 

 

 

 

 

 

 

 

 

10

11