
1 | Attach the accessory flash to |
| the camera before turning the |
| flash and camera on. |
• The flash must be mounted on the accessory shoe because the camera needs to send a signal to the flash to turn on its wireless/remote function.
2 With the camera and flash on,turn the function dial to | . |
3 | While pressing the function | ||
| button, turn the control dial | ||
| until | and | appear on |
| the camera’s data panel. |
button
The accessory flash is controlled by a light signal from the
1 | Position your camera and flash unit using the |
| |
| information of this page. |
•The example below is with the 3600HS (D) flash unit. For other flash units, refer to the instruction manual for the correct camera to subject and flash to subject distances.
•Photograph in dark locations.
Place the camera and flash unit Distance within a 5 m radius of the subject
The remote/wireless flash may not detect the control signals if
it is placed behind the subject.
Distance
ISO 100 |
|
|
| ISO 400 |
|
|
| DETAILED OPERATION |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| camera- | Flash- |
|
| camera- | Flash- |
|
|
Aperture | subject | subject |
| Aperture | subject | subject |
|
|
distance | distance |
| distance | distance |
|
| ||
|
|
|
|
| ||||
f/2.8 | 1.4 | 1.4 |
| f/2.8 | 2.8 | 2.8 |
|
|
4.6 | 4.6 |
| 9.2 | 9.2 |
|
| ||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
f/4 | 1.0 | 1.0 |
| f/4 | 2.0 | 2.0 |
|
|
3.3 | 3.3 |
| 6.6 | 6.6 |
|
| ||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
f/5.6 | 1.0 | 1.0 |
| f/5.6 | 2.0 | 2.0 |
|
|
3.3 | 3.3 |
| 6.6 |
|
| |||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
96 | Continued on next page | 97 |
|