4 Changing the Device Setup
If you are using NDS (NetWare 4.x or 5.x):
1.Put a check mark into the NetWare 4.x NDS Context check box.
2.Click the 
button to display the Mode Select dialog box, which shows a list of NDS trees on the NetWare network.
3.Select the NDS tree you want to setup as the print server, and then click the OK button.
4.Click the 
button to display the Mode Select dialog box, which shows a list of NDS contexts for the tree you selected.
5.Select the NDS context to setup the print server, and then click the OK button.
6.When everything is the way you want, click the Next button.
Note
•If you are logged on to the NetWare network without supervisor privileges, the NetWare login screen will appear after you finish configuring the setup. If this happens, type in the supervisor login name and password, and then click OK.
18
