5 Option Setup
Specify IP discovery range:
Perform the steps below to specify the IP address range for the network where the device is searched for. PageScope Network Setup searches for devices on the broadcast address of the network specified here.
a.Type the IP address of the device you want to find into the IP Address box.
b.Type the subnet mask used by the network into the Subnet Mask box.
c.Click the Append button.
d.The search range is set automatically in accordance with the values you entered in the previous steps, and the resulting search range appears in the Discovery Range box.
Add device manually:
A device that cannot be automatically searched for can be displayed in the device list by entering its IP address.
a.Type the IP address of the device you want to display into the IP Address box.
b.Click the Append button.
If the entered IP address is accessed and there is a response, that IP address is added to the Add Device box.
To remove an address appearing in the Add Device box, select it, and then click the Delete button.
4.If everything is the way you want, click the OK button.
5.On the confirmation dialog box that appears, click the OK button.
26
