Before Using the Printer Driver | 1 | ||
|
| ||
|
|
| |
1.5Connecting the Machine to a Computer
Important!
Note the following precautions whenever turning off the machine.
Never turn off the machine when either of the following conditions exists.
While the machine is performing some operation
While there is print data stored in machine memory (Turning off power deletes data input from the computer.)
After turning the machine off, wait for at least about 10 seconds before turning it back on again. Wait until the machine completes its power up routine before trying to print.
Connecting directly to a computer with a USB cable
1Find the machine’s USB port.
The USB port is located on the back of the machine.
2Plug one end of the USB cable into the machine’s USB port.
3Install a printer driver on your computer.
See “Installing a Windows Printer Driver” on page
4Connect the other end of the USB cable to the computer’s USB port.
See the documentation that came with your computer for information about where its USB port is located.
Important!
Make sure you install the printer driver before you connect the USB cable to the computer.
Pi3505e Printer Driver |