4 | Configuring PCL Printer Driver Properties for Windows |
|
Note
Stapling may be canceled automatically if a print job is made up of pages of different sizes.
The stapling position is determined based on the orientation of the first page of the print job. Remember this when printing a document made up of pages that are oriented differently from each other.
Only Center can be selected for stapling while Booklet is selected on the Setup tab.
Tip
The current stapling locations are reflected in the graphic icon shown on the dialog box.
(2)Punch
These settings are available only when the Punch Kit
• | Off | No page punching |
• | Auto | Pages are punch along the top edge when |
|
| landscape orientation is selected, or along the |
|
| left edge when portrait orientation is selected. |
• | Top | Pages are punched along the top edge. |
• | Left | Pages are punched along the left edge. |
• | Punch Holes | Specify the number of holes to be punched. |
|
| Available settings: |
|
| 2, 3, 4 |
Pi3505e Printer Driver |