4

Configuring PCL Printer Driver Properties for Windows

 

(4)Size

Specify a font size in the range of 8 points to 200 points.

(5)Style

Use these settings to turn bold and italic style on or off.

•

Bold

Bold text

•

Italic

Italic text

(6)Shading

Specify the relative density of the watermark text, in the range of 5% to 100%.

(7)Angle

Use this setting to specify the angle of the watermark text relative to the paper. You can specify Horizontal, Diagonal, Vertical, or User Setting as the angle.

• User Setting These settings become available when User Setting is selected for the angle setting. Use them to configure settings that control the angle of the watermark text. The setting range is -180°to +180°.

Anegative (-) value rotates the characters clockwise, 0 specifies the text should be parallel to the paper, and a positive (+) value rotates the characters counter-clockwise.

(8)Position

Specify the position where the watermark text should be printed.

•

Center

Selecting this setting prints the watermark text

 

 

in the center of the paper.

•

User Setting

After selecting User Setting, you can specify a

 

 

position by using horizontal and vertical values.

 

 

Horizontal: -999 to 999 points

 

 

Vertical: 999 to 999 points

 

 

(72 points = 1 inch)

Tip

Specify the position from the center. A positive Horizontal value is to the right, while a positive Vertical value is upward. The settings you make will be reflected in the dialog box’s preview image.

4-30

Pi3505e Printer Driver