Installing a Windows Printer Driver

2

 

 

 

 

 

2.4Installation through Plug and Play

If the local connection (USB) is made between the PC and the copier, the printer driver can be installed through the “Plug and Play” function.

For details of how to install the printer driver, see “Installing a Windows Printer Driver” on page 2-1.

Note

Windows NT 4.0 does not support “Plug and Play” and USB.

Connecting the USB Cable

Windows 98 and 98SE:

Following the instructions given in the “Add New Hardware Wizard” that will be automatically started through Plug and Play, install the USB device driver and then install the printer driver.

1Connect the USB cable to the copier and PC with the Power Switch ON.

2The installation of the printer driver through Plug and Play is automatically started on the PC.

3Install the USB device driver according as instructed by the “Add New Hardware Wizard”.

The USB device driver is stored in the printer driver CD-ROM.

4Following the instructions given in the “Add New Hardware Wizard” that will automatically appear after the USB device driver has been installed, install the printer driver.

Windows Me, 2000 and XP:

1Connect the USB cable to the copier and PC with the Power Switch ON.

2The installation of the printer driver through Plug and Play is automatically started on the PC.

3Install the printer driver according as instructed by the “Add New Hardware Wizard”.

Pi3505e Printer Driver

2-11