2

Installing a Windows Printer Driver

 

Making General Settings Before Using the Printer

The printer driver requires setting of items that are common to all print jobs, including the port to which the printer cable is connected and optional devices configured with the machine. These settings must be made using properties dialog box available from the Properties command after the printer driver has been installed or whenever the operating environment is changed.

The most common settings were made when the printer driver was installed, meaning that you do not usually bother to change them. Some items must, however, be changed in the following cases.

Cases where changes are necessary

Applicable property tab

You want to add a comment to distinguish the printer

General

from others

 

 

 

The computer’s connecting port has been changed

Details

You want to change the conditions for the display of a

 

timeout error

 

You want to designate a port to which the machine is

 

connected via a network (this setting must be made on

 

a computer connected to the machine via a network)

 

 

 

This setting is not related to printing.

Color Management

 

 

You want to share the machine with other computers

Sharing

connected to the same network (this setting must be

 

made on the computer directly connected to the

 

machine)

 

 

 

For details of “Using PCL Printer Driver Properties Tabs” on page 4-1.

Note

Refer to the User Manual on the controller CD-ROM for information about how to actually configure settings.

2-4

Pi3505e Printer Driver