Konica Minolta Pi3505e manual 61

Configuring PCL Printer Driver Properties for Windows 4

Output Setting Dialog Box

This dialog box appears when you click the Detail of Output Setting button on the Setup tab. You can use it to configure stapling, hole punching, and folding.

(3)

(1)

(2)

(1)Staple

This setting is available only when the Built-in Finisher (FN-117) is installed on the machine. You can use it to staple the pages of one printed document at a time.

•	Off	No page stapling
•	Auto 2-points	Pages are stapled at two points along the top
		edge when landscape orientation is selected, or
		along the left edge when portrait orientation is
		selected.
•	Top 2 points	Pages are stapled at two points along the top
		edge.
•	Left 2 points	Pages are stapled at two points along the left
		edge.
•	Corner	Pages are stapled in upper left corner.

If you have the Saddle Kit (SK-1) equipped on the Built-in Finisher (FN-117) , you can also configure the following settings in addition to those described above.

•	Center	Pages are stapled in the center.
•	Crease	You can select Crease for the (3) Fold setting.

Pi3505e Printer Driver 4-13