Using Your Universal Room Controller
5.3Using the Macro Buttons
Pressing any button initiates a macro sequence1, during which the button blinks (as programmed by the system integrator).
If during the macro sequence the button blinks faster than usual2, this indicates that a malfunction has been detected3 and the
To solve the problem, summon technical help4
If you want to stop a macro sequence, press and hold that button for 5 seconds. The sequence will come to an end. You can resume operation by pressing any of the buttons5. The unit will carry out the macro sequence commands from the beginning.
5.4Locking the Front Panel
The front panel can be locked to avoid unintended tampering with the buttons.
To lock the panel press and hold buttons 7 and 8 simultaneously for about 2 seconds (as illustrated in Figure 7).
All the buttons blink momentarily and the panel is locked. When pressing a button at this stage, all the buttons blink twice.
To unlock the panel buttons, press the same buttons once again. All the buttons blink momentarily and unlock. You can now use the buttons as usual.
5.5Turning the Light of the Backlit Buttons On and Off
When the room is darkened, the buttons can be illuminated for convenience.
To turn on the backlight press buttons 5 and 6 simultaneously (as illustrated in Figure 7).
To turn off the backlight, press the respective buttons once again.
1The macro sequence can be carried out instantly or can take a while, depending on the delay times included in the sequence
2Six times per second, as compared with twice per second during normal operation
3For example, a faulty DVD player
4In this example, press the HELP DESK button
5Including the button you kept pressed to stop the macro sequence
10 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |
