Using Your Universal Room Controller
5.1Operating the RC-8IR
In the following example1, that is illustrated in Figure 5, the
Each button may be assigned with up to 15 commands.
Table 4: The Commands Configuration
ON | OFF | |
DVD | Vol | |
UP | ||
| ||
PC | Vol | |
DOWN | ||
| ||
VCR | HELP | |
DESK | ||
|
Figure 5: RC-8IR Labels
Setup
The Label |
| The Macro Sequence |
ON | Power up the projector | |
| Power up the power amplifier | |
| Power up the DVD player | |
| Power up the video player | |
| Roll down the projector screen | |
| Turn on the speakers | |
| 1 minute delay [for the projector to heat up] | |
| Turn lights off | |
| The projector selects the PC input | |
OFF | Turn lights on | |
| Power down the projector | |
| Power down the power amplifier | |
| Stop the DVD player | |
| Power down the DVD player | |
| Stop the video player | |
| Power down the video player | |
| Roll up the projector screen | |
| Turn off the speakers | |
DVD | Stop the video player | |
| The projector selects the DVD input | |
| Play the DVD | |
VCR | Stop the DVD | |
| The projector selects the VCR input | |
| Play the VCR | |
PC | Stop the DVD | |
| Stop the VCR | |
| The projector selects a PC input | |
Vol UP | Power amplifier volume up | |
Vol DOWN | Power amplifier volume down | |
HELP DESK | Call for technical assistance | |
1 This is only one example among numerous possibilities, each button can be configure as required 2 By the technical installer
3 A macro sequence, including up to 15 commands per button, carried out one after the other
8 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |
