Introduction

5.6Using the Internal Web Page

The internal Web page can be used to remotely operate the RC-8IRvia the Ethernet.

To control your RC-8IRvia the internal Web page, do the following:

1.Type the unit’s IP number1 in the Address bar of your browser (or type any link defined by the system integrator).

The RC-8IRfront panel is displayed on your screen (see Figure 8).

2.Press the on-screen buttons to control the unit.

Figure 8: Internal Web Page Front Panel

6 Technical Specifications

Table 5 defines the technical specifications:

Table 5: Technical Specifications2 of the Universal Room Controller Series

PORTS:

2 RS-232 on terminal block connectors; 1 RS-485 on terminal block

 

connectors; 1 ETHERNET RJ-45 port

OUTPUTS:

2 relays on terminal block connectors (36V AC or DC, 2A, 60VAC

 

maximum on non-inductive load); 2 IR emitters on terminal block

 

connectors (for RC-6IRand RC-8IR)

POWER SOURCE:

12 VDC, 155mA

DIMENSIONS:

11.4cm x 4.3cm x 6.9cm (4.49" x 1.70" x 2.72", W, D, H)

WEIGHT:

0.3 kg (0.67 lbs.) approx

ACCESSORIES:

Power supply, Java based control software (internal), Windows®-based

 

Kramer control software

OPTIONS:

Dual IR emitter cable, single IR emitter cable, IR extension cable

1 The default IP number is 192.168.1.39, and may be changed by the system integrator 2 Specifications are subject to change without notice

11

Page 13
Image 13
Kramer Electronics RC-6IR, RC-8IR user manual Technical Specifications, Using the Internal Web