Contents
1 | Introduction | 1 |
2 | Getting Started | 2 |
2.1 | Achieving the Best Performance | 2 |
2.2 | Safety Instructions | 2 |
2.3 | Recycling Kramer Products | 3 |
3 | Overview | 4 |
3.1 | Defining the | 5 |
3.2 | Using the IR Transmitter | 8 |
4 | Installing the | 9 |
5 | Connecting the | 10 |
5.1 | Connecting to the | 11 |
5.2 | Connecting a PC or Controller to the | 12 |
5.3 | Connecting the | 15 |
6 | Operating the | 18 |
6.1 | Routing Inputs to Outputs | 18 |
6.2 | Disconnecting Outputs | 18 |
6.3 | Storing and Recalling Setups in Presets | 19 |
6.4 | Switching Between Protocol 2000 and Protocol 3000 | 19 |
6.5 | Acquiring the EDID | 20 |
6.6 | Locking and Unlocking the Front Panel Buttons | 22 |
6.7 | Control Configuration via the Ethernet Port | 22 |
7 | Controlling the | 23 |
7.1 | Connecting to the | 23 |
7.2 | The Main Switching Matrix Page | 26 |
7.3 | The Configuration Page | 31 |
8 | Technical Specifications | 33 |
9 | Default Communication Parameters | 34 |
10 | Default EDID | 35 |
11 | Updating the | 37 |
12 | Table of ASCII Codes for Serial Communication (Protocol 3000) | 38 |
13 | Hex Codes for Serial Communication (Protocol 2000) | 39 |
14 | Kramer Protocol | 40 |
14.1 | Switching Protocols | 40 |
14.2 | Kramer Protocol 3000 | 40 |
14.3 | Kramer Protocol 2000 | 47 |
i |