Kramer Electronics VS-88DTP Operating in the Offline Mode, To operate in the Offline mode

Figure 15: Selecting a Switching Point on the Matrix

A blue switching icon appears indicating that the channel is switched to In 1 and Out 4.

2.Repeat the above steps for each channel that you want to switch.

7.2.2Operating in the Offline Mode

By default, the unit operates in the At-Once mode, meaning that any switching changes take effect immediately. In the Offline mode, changes only take effect when you press the Take button.

To operate in the Offline mode:

1.Click the red Offline button.

The button outline becomes dark.

2.Click the required point in the switching matrix grid (In 1, Out 5).

The switching icon outline appears, and the Take and Cancel buttons change from gray to dark blue.

VS-88DTP - Controlling the VS-88DTP Remotely via Ethernet 27