Kramer Electronics VS-88DTP Default Communication Parameters, Edid, RS-232, Switching Protocol

9 Default Communication Parameters

EDID

EDID data is passed between Output 1 and Input 1
RS-232
Protocol 2000		Protocol 3000 (Default)
Baud Rate:	9600	Baud Rate:	115,200
Data Bits:	8	Data Bits:	8
Stop Bits:	1	Stop Bits:	1
Parity:	None	Parity:	None
Command Format:	HEX	Command Format:	ASCII
Example (Output 1 to	0x01, 0x81, 0x81,	Example (Output 1 to	#AV 1>1<CR>
Input 1):	0x81	Input 1):
Switching Protocol
P2000 -> P3000		P3000 -> P2000
Command:	0x38, 0x80, 0x83,	Command:	#P2000<CR>
	0x81
Ethernet
Default Settings		Reset Settings
IP Address: 192.168.1.39		Power cycle the unit while holding in the
		Factory Reset button, located on the rear
TCP Port #: 5000
		panel of the unit.
UDP Port #: 50000

The Windows®-based Kramer control software (available for download the latest software from our Web site at

i http://www.kramerelectronics.com) operates with protocol 2000.

If the VS-88DTPis set to protocol 3000, it is automatically switched to protocol 2000

34 VS-88DTP - Default Communication Parameters