may be included in the driver diskette after this guide is published. Please refer to the \README.DOC file first for the latest informa- tion before you install any drivers.
3.2 PCI BIOS Setup
Before installing the driver, it is recommended to run the system PCI BIOS setup utility to check each PCI slot that contains a Fast Ethernet PCI adapter for the following PCI settings:
1.Enable/disable the PCI slot : make sure the PCI slot is enabled for the adapter.
2.Assign an IRQ number : make sure the IRQ number does not conflict with other
3.Enable bus mastering : the PCI slot must be enabled for bus mastering.
On a PCI
Note:
*When the PCI adapter is installed in some PCI computers with EISA slots, you must run the EISA configuration utility. If the utility is not available, consult your computer supplier.
8
