Setup and Registration
6-28
11 Press the U or V key to select [On] or [Off].
NOTE: When the machine receives originals, the
encryption box is not used.
12 Press the OK key. Proceed to the next step or step 15
when [On] or [Off] is selected in step 11, respectively.
13 Use the numeric keys to enter the box number (0000 to
9999).
14 Press the OK key.
15
Press the Start key. The transmission will start.
Operation at the Receiving System
To conduct encryption communication operating the receiving system, follow the steps below.
NOTE: In encryption communication, sub address communication cannot be used.
1Register the encryption key you have arranged with the
sending system. (Refer to Registering an Encryption Key
on page 6-25.)
2Press the System Menu/Counter key.
3Press the U or V key to select [FAX].
4Press the OK key.
5Press the U or V key to select [Reception].
6Press the OK key.
7Press the U or V key to select [Encryption RX].
8Press the OK key.
9Press the U or V key to select [On].
10 Press the OK key.
Encryption Box:
a
b
*********************
2
On
1
*Off
Box Number Entry:
M
b
(0000 - 9999)
****0000*
Encryption RX:
a
b
1
*Off
*********************
2
On