FAX Operation (Advanced)
4-6
Interrupt Send
During communication, when you scan originals by selecting direct transmission, you can use interrupt send. Even
when the communication is prolonged due to broadcast transmission or a next transmission being scheduled, the
machine will first send originals for which interrupt send has been set.
NOTE: When the number of standby transmissions and delayed transmissions has already reached 30, you cannot
use interrupt send.
Depending on the timing of the interruption, you may not be able to interrupt transmission immediately.
1Press the FAX key.
2Load the originals to be sent using Interrupt Send.
3Press the Function Menu key.
4Press the U or V key to select [FAX Direct TX].
5Press the OK key.
6Press the U or V key to select [On].
7Press the OK key.
8Set the destination, and press the Start key. The panel
display will switch to the standby screen, and the
transmission will start when transmission becomes
possible.
NOTE: For operation of direct transmission, refer to
Selection of Transmission Method on page3 -2.
To cancel transmission while waiting for interrupt send, press
the Stop key on the operation panel. For details, refer to
Cancelling Communication on page 3-10.
9When the interrupt send is completed, the canceled
communication and standby transmission will
automatically resume.