Basic Operation
3-4
ID Card Copy is printed on
the
Program 1
key.
When the functions are deleted by overwriting
Program 1
key, seal the label supplied with the
machine and write the function name in it.
The procedure for using ID Card copying is explained below.
1Press the Copy key when the Copy key/indicator
is off.
NOTE: If the Message Display is turned off, press the
Power key and wait for the machine to warm up.
2Place the original on the platen.
Put the scanning side facedown in the center of
Statement or A5 size scanning area.
NOTE: For loading instructions, refer to Loading
Originals on page 2-44.
3Press the Program 1.
The ID Card Copy function is recalled.
4Press the Start key. Scanning begins.
5Turn over the original on the platen and press the
Start key.
6After scanning all originals, press [End Scan] (the
Right Select key) to start copying.
Registering Settings After making settings, press and hold the one of the
Program 1 to 4 keys where you want to register the
settings for 3 seconds. The current settings are
registered to the selected program key.