Default Setting (System Menu)
8-149
8
Network Setup
The following network settings are available.
LAN Interface Setup …8-149
TCP/IP (IPv4) Setup …8-150
TCP/IP (IPv6) Setup …8-150
NetWare Setup …8-152
AppleTalk Setup …8-153
WSD Scan Setup …8-154
WSD Print Setup …8-155
Protocol Detail …8-157
NOTE: After all network related settings have been done, turn the machine OFF and ON again. This is
mandatory to make the settings effective!

LAN Interface Setup

Specify the settings for the LAN interface to be used. The default setting is Auto.
Use the procedure below to select the interface.
1In the Sys. Menu/Count. menu, press the U or V
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
Sys. Menu/Count.:
a
b
1
Report
2
Counter
*********************
[ Exit ]
3
System
Login User Name:
L
b
*******************
Login Password:
[ Login ]
System:
a
b
*********************
2
I/F Block Set.
3
Security Level
[ Exit ]
1
Network Setting