Default Setting (System Menu)
8-103
8
6Press the OK key. This displays the density
selection screen for the mode selected in step 5.
The screen shown is the one when [Manual] is
selected.
7Press the U or V key to select the density from [-
3 Lighter] to [+3 Darker].
8Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
AutoColorCorrect
This setting allows you to adjust the detection level used by the machine to determine whether the original is
color or black and white during Auto Color Mode. Setting a lower value will result in more originals being
identified as color, while a larger value will tend to increase the number of originals being identified as black and
white.
Use the procedure below to set the Auto Color Detection Level.
1In the Sys. Menu/Count. menu, press the U or V
key to select [Adjust/Maint.].
2Press the OK key. The Adjust/Maint. menu
appears.
3Press the U or V key to select [AutoColorCorrect].
4Press the OK key. AutoColorCorrect appears.
5Press theU or V key to select a value from [5] to
[1].
6Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
Manual:
a
b
3
-1
*********************
5
+1
4
* 0 Normal
Sys. Menu/Count.:
a
b
:
Document Box
;
Edit Destination
*********************
[ Exit ]
<
Adjust/Maint.
Adjust/Maint.:
a
b
*********************
2
Send/Box Density
3
AutoColorCorrect
[ Exit ]
1
Copy Denst. Adj.
AutoColorCorrect:
a
b
*********************
2
4
3
3
1
5