Default Setting (System Menu)
8-114
4Press the OK key. The Service Setting menu
appears.
5Press the U or V key to select [Drum Refresh].
6Press the OK key. A confirmation screen appears.
7Press [Yes] (the Left Select key). Completed. is
displayed and the screen returns to the Adjust/
Maint. menu.
Altitude Adj. (Altitude adjustment setting)This sets the altitude adjustment mode. If you are using the machine at an altitude of 1500 m or higher and print
quality has deteriorated, the Altitude Adjustment mode setting can be used to restore print quality.
Use the procedure below to set the altitude adjustment setting.
1In the Sys. Menu/Count. menu, press the U or V
key to select [Adjust/Maint.].
2Press the OK key. The Adjust/Maint. menu
appears.
3Press the U or V key to select [Service Setting].
Service Setting:
a
b
*********************
2
Network Status
3
Test Page
[ Exit ]
1
Service Status
Start the drum
refresh.
Are you sure?
[ Yes ] [ No ]
Sys. Menu/Count.:
a
b
;
Document Box
<
Edit Destination
*********************
[ Exit ]
=
Adjust/Maint.
Adjust/Maint.:
a
b
*********************
2
Send/Box Density
3
AutoColorCorrect
[ Exit ]
1
Copy Denst. Adj.