Sending Functions
5-20
Continuous Scan
When the multi-page originals cannot be placed in the document processor at one time, the originals can be
scanned in separate batches and then sent as one job. With this function, originals can be scanned one after
another until you press [End Scan] (the Right Select key).
The procedure for using continuous scanning when sending scanned images is explained below.
1Press the Send key.
2Press the Function Menu key. Function Menu
appears.
3Press the U or V key to select [Continuous Scan].
4Press the OK key. Continuous Scan appears.
5Press the U or V key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
6Specify the destination.
7Place the original, and press the Start key.
8Place the next original, and press the Start key.
Scan the remaining originals by the same
procedure.
When you have scanned all the originals, press
[End Scan] (the Right Select key) to start sending.
Function Menu:
a
b
*********************
2
Original Size
T
3
Original Image
T
[ Exit ]
1
Color Selection
g
Continuous Scan:
a
b
*********************
2
On
1
*Off