Management
11-10
5The overwrite confirmation screen appears.
Press [Yes] (the Left Select key). The user
information is changed and the screen returns to
Local User List.
Deleting a user
1Press the U or V key to select the user you want
to delete, and then press [Menu] (the Right Select
key).
2Press the U or V key to select [Delete] and then
press the OK key.
3In the delete confirmation screen, press [Yes] (the
Left Select key). The user is deleted and the
screen returns to Local User List.
Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.]
is selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide
of the LDAP server.
Use the procedure below to enable group authentication.
NOTE: Refer to Character Entry Method on Appendix-7 for details on entering characters.
NOTE: You can configure detail settings of group authentication in COMMAND CENTER. For details, refer to
the KYOCERA COMMAND CENTER Operation Guide.
1See the procedure for displaying user control on
page 11-2, and display the User/Job Account.
2Press the U or V key to select [User Login Set.].
3Press the OK key. The User Login Set. menu
appears.
Local User List:
a
b
l
DeviceAdmin
*********************
l
User1
[ Menu ]
l
Admin
Menu:
a
b
1
Detail/Edit
*********************
3
Add User
2
Delete
User Login Set.:
a
b
*********************
2
Local User List
3
Group Auth.
[ Exit ]
1
User Login