Setup
Setting the Current Date and Time
You can also make this setting using COMMAND CENTER.
NOTE: Periodically check the time that is shown in the message display and adjust as necessary to match the current time.
1
2
3
Press S or T to select Year/Time.
Press Enter. The date setting screen (year:month:day) is displayed.
To set the date, for each field press S or T as many times as necessary to display the correct value, then press X to move to the next field.
4 When the date is correct, press Enter. The time setting screen (hour:minute:second) is displayed.
5 To set the time, for each field press S or T as many times as necessary to display the correct value then press X to move to the next field.
6 Press Enter. The message display shows Completed and returns to the Date/ Timer Set. screen.
7 Press right Select. The message display returns to the basic screen.
4 | NETWORK SCANNER SETUP GUIDE |
