Kyocera FS-1118MFP, KM-1820 setup guide Accessing COMMAND CENTER, Advanced TCP/IP Setting

Setup

Accessing COMMAND CENTER

1

2

COMMAND CENTER refers to the machine’s integrated web-based interface. This enables you to verify the operating status of the machine and change settings related to security, network printing, e-mail transmission and advanced networking.

Open the web browser.

In the Address or Location bar, enter the machine’s IP address as the URL, e.g. http://192.168.48.21/. The web page displays basic information about the machine and COMMAND CENTER as well as the current status of the machine.

3	Select a category from the navigation bar on the left to view and set values for that
	particular category.
4	If administrator privileges have been enabled on the COMMAND CENTER,
	remember to enter the correct user name and password when trying to access the

relevant screens.

Advanced TCP/IP Setting

Advanced > Protocols > TCP/IP > General page

This page allows you to edit the settings that are required for network printing and sending e-mail. Restart the machine to register any changed settings.

NETWORK SCANNER SETUP GUIDE 7