Setup
Network Settings
Registering the IP Address
System Menu/
Counter
Sor T
System Setting
Enter
Sor T
Network Setting
Enter
Sor T
TCP/IP Setting
Enter
Sor T
DHCP
Enter
Sor T
Off
Enter
Sor T
IP Address
Enter
Check the IP address with your network administrator before changing this setting. You can enter an IP address only when the DHCP setting is Off and the TCP/IP setting is On. Any changes made to the network settings will only become effective after you turn the machine off and then back on again.
1 Access IP Address.
2 Use the numeric keys to enter each segment of the IP address in turn, pressing X or [*.] to move between segments.
If you make an error in entering a portion of the IP address, press W to return to the previous block of digits and
3 Press Enter on completion.
4 Register the Subnet Mask - refer to Registering the Subnet Mask on page 6.
NETWORK SCANNER SETUP GUIDE | 5 |