Kyocera KM-NET manual Troubleshooting, Symptom, Cause, Remedy, Operation Guide

		Troubleshooting
Symptom	Cause	Remedy
Status remains not	The printing system has been	Turn the printing system on.
connected.	turned off.
	The printing system has been	Connect the printing system to the
	removed from the network.	network.
	The printing system has lost	Verify that there is an active network
	the connection to the network.	connection to the printing system.
	An error condition exists on	Cancel the error on the printing
	the printing system.	system.
	The network address of the	The network address of a printing
	printing system has been	system is changed by DHCP, etc.
	changed.	Search for the printing system
		again.

In very rare cases, extremely heavy network traffic may prevent this utility from detecting printing systems.

Try again after a brief interval or contact your network administrator.

The printing system	The password is set for the	Enter the password properly.
cannot be configured.	printing system.
	The printing system has been	Turn the printing system on.
	turned off.
	The printing system has been	Connect the printing system to the
	removed from the network.	network.
	The printing system is printing	Try again after processing and
	or processing data.	printing are complete.
	The printing system is in	Try again after menu mode is no
	menu mode.	longer being used.
	The Read or Write community	Contact your network administrator.
	name does not match the one
	stored on the network
	interface.
	There are some settings that	-
	cannot be changed from this
	utility. They appear grayed out
	in the menu.
	Also, when an item is not
	supported for the selected
	model then it will be displayed
	as blank.
	If the keys and buttons on the	Unlocked the keys and buttons.
	operation panel of the
	printings system are locked,
	the menu screen can not be
	displayed when pressing
	menu button.

Operation Guide 57