User Guide for the Kyocera KX12 Phone 7
2USING TOUCH2TALK
The Touch2Talk (T2T) feature on your Kyocera
KX12 phone allows you to quickly communicate
with an individual or group. Once connected,
simply press and hold the walkie-talkie button
tocommuni cate.
Note: The T2T feature on this phone can be used
only with compatible T2T phones.

Phone position

When using your phone as a walkie-talkie radio,
hold the phone in a vertical position one to two
inches (2.5 to 5 cm) away from your mouth.

Speakerphone

T2T calls come through the speakerphone by
default. The loudspeaker is located behind the keys
of your phone.
Call waiting: If you accept any type of call
through call waiting, the incoming call sound
will be the same as the sound of the call you are
in already. For example, if you are on a cellular
call using the earpiece and you accept an
incoming T2T call, the sound for the T2T call
will come through the earpiece.
Headset: If a headset is connected to the phone,
T2T calls come through the headset speaker,
and you speak through the headset
microphone. You are required to press the
walkie-talkie button to gain floor control of a
T2T call and speak to other parties. (Headsets
are sold separately.)
The icon at the top of the phone screen
indicates that the speakerphone is on.
Press the speakerphone button on the
top of the phone to turn it off.

Adjusting T2T call volume

To adjust speakerphone volume while
on a T2T call—Press the volume key on the left
side of the phone up or down during the call.
To make a T2T call come through the earpiece—
Press the speakerphone button during a call.
To cancel, press the speakerphone button.
To make a T2T call come through the earpiece
and silence ringers—From the home screen,
select Menu Settings Silent Mode and
select a vibrate or lights setting.
To cancel, either press the speakerphone
button or select Menu Settings
Silent Mode Normal Sounds.
82-N8190-1EN.book Page 7 Friday, January 27, 2006 11:09 AM