Kyocera KX12 manual Calling using digit dialing, Using voice features with hands- free car kits

6.When you are finished with the call, press

. You cannot end the call with a voice command.

Erasing all voice tags

1.Select Menu → Settings →

Voice Features → Erase Voice Dial.

2.Select Yes.

3.Select Yes again at the confirmation.

Calling using digit dialing

You can speak the digits of a phone number to dial it.

Note: You cannot speak a string of digits. You must speak one digit at a time and wait for the prompt.

1.From the home screen, press . The phone responds: “Say a name or say Dial.”

2.Say “Dial.” The phone responds: “Speak a digit.”

3.Speak the first digit of the phone number you want to call. Once the phone repeats the digit, you can speak the next digit.

If you pause, the phone prompts you with the following five options. After the prompt, speak an option.

–Say “Clear” to erase the last digit entered. The phone responds: “Digit cleared.” To clear the entire phone number,

say “Clear” again. When the phone prompts you with “Clear entire phone number?”, say “Yes” to clear or “No” to cancel.

–Say “Call” to dial the number.

–Say “Verify” to hear the set of spoken digits.

–Say “Cancel” to exit voice recognizer and return to the home screen.

–Speak a digit to enter the next digit. Once the phone repeats the digit, you can speak the next digit or pause to hear the prompt.

Using voice features with hands- free car kits

You can use voice commands to make a phone call or to answer the phone if your phone is connected to a hands-free car kit (sold separately).

To shop for these accessories, visit www.kyocera-wireless.com/storeor call

800-349-4188 (U.S.A. only) or 858-882-1410.

Waking up the phone

If your phone is connected to a hands-free car kit, you can use a voice command to activate the phone to make a call.

Note: Voice Wake-up does not work with Keygaurd active. To disable Keygaurd, see “Locking your phone” on page 44.

User Guide for the Kyocera KX12 Phone 49