Kyocera KX12 Installing the battery, Removing the battery, Getting Started, Place the two tabs at

1GETTING STARTED

Installing the battery

Your Kyocera KX12 phone comes with a removable lithium ion (LiIon) battery.

Fully charge the battery before using the phone.

To charge the battery see “Charging the battery” on page 2. Only connect the charger as instructed.

To install the battery:

1.Place the phone face down with the battery recess toward you.

2.Place the battery in the phone recess with

the copper contacts toward the bottom of the phone (1). Press the upper portion of the battery into place (2).

3.Place the two tabs at the

top of the rear cover into the openings at the top of the phone assembly. Press the rear cover onto the phone.

4.Close the port plug over

the latch, charging jack, and headset jack.

Removing the battery

Warning: Before you remove the battery, make sure the phone is powered off.

1.Open the port plug.

2.Between the phone jacks,

there is a latch to aid you in opening the rear cover. Pull the top of the latch outward to release the rear cover.

3.Pull the rear cover away to remove it from the phone.

4.Press the battery toward the bottom of the phone

and pull the battery out of the recess.

User Guide for the Kyocera KX12 Phone 1