Receiving T2T calls and alerts, Sending a T2T alert

Making a group T2T call

A group must be saved before you can call it. To save a group, see page 12.

1.Select Menu → Touch2Talk → T2T Groups.

2.Highlight the group you want to call.

3.Press and hold the walkie-talkie button. When the audio path is ready and the group is available, the “Ready to Speak” tone sounds.

Note: If the group is unavailable or offline, or if you attempt to take the floor on a group call while someone else is speaking, the “Bong” tone sounds.

4.Speak your message while continuing to press the walkie-talkie button.

5.Release the button when finished speaking your message. This allows the group members a chance to reply.

6.Press the walkie-talkie button again to speak.

7.To end the T2T call, press or .

Sending a T2T alert

You can send an alert only to a contact that is saved in your T2T Contacts list. The recipient can choose to ignore the alert or accept it and start a T2T call with you.

Start at the home screen.

1.Press the walkie-talkie button.

- or -

Select Menu → Touch2Talk → T2T Contacts.

2.Scroll through the list and highlight the T2T contact you want to call.

3.Press to select Alert.

“Alert sent.” appears on your screen, then you return to the previous screen.

The receiving party’s phone beeps and a message appears on the phone screen.

There is no time-out period. The alert will remain on their screen until they accept or ignore it.

4.If the recipient accepts the alert, you will hear their voice through your phone. Press the walkie-talkie button and wait for the “Ready to Speak” tone (three rapid chirps).

5.Speak your message while continuing to press the walkie-talkie button.

6.Release the button when finished speaking your message. This allows the group members a chance to reply.

7.Press the walkie-talkie button again to speak.

8.To end the T2T call, press or .