Kyocera KX12 manual Saving, editing, and erasing T2T contacts, Receiving a T2T alert

In a private call, appears on the screen with the caller’s contact name or phone number.

In a group call,	appears with the name of
the group.

1.Press and hold the walkie-talkie button.

2.Listen for the “Ready to Speak” tone (three rapid chirps).

3.Speak while pressing the walkie-talkie button.

4.Release the walkie-talkie button when finished speaking. This allows another party to reply.

5.Wait for the “Ready to Speak” tone, then press the walkie-talkie button again to speak.

6.To end the T2T call, press or . If the other party ends the call, no action is required.

Receiving a T2T alert

When your phone receives a T2T alert, the phone beeps. The name or phone number of the caller appears on the screen with the message “[name /phone number] requests a T2T call. Please press the Walkie-Talkie button.”

•To ignore the alert, press to select Ignore.

•To accept the alert and call the person, press the walkie-talkie button.

Saving, editing, and erasing T2T contacts

Adding a T2T contact

You can add new T2T contacts and view their presence in the T2T contacts directory using the main T2T menu.

Note: The potential contact will be notified and must give permission before you can save their phone number as a contact.

1.Select Menu → Touch2Talk → T2T Contacts.

2.Press to select Options.

Note: When you are adding your first T2T

contact, you will be asked “No T2T Contacts.

Add New?” Press to select Yes.

3.Press to select Add New Contact.

4.Enter the T2T contact number.

5.Press down and enter the T2T contact name.

If you do not enter a contact name, the contact phone number will appear on your phone instead of a name.

6.Press to select Save. The message, “Sending request...” appears.

–If the T2T contact number is valid and the other party accepted your request to be added, “Contact Name Added” appears.

10 Using Touch2Talk