Kyocera S2410 manual Call Features, Volume control, Hold call, Speed dialing, Touch dialing

3 Call Features

This chapter describes call features such as volume, holding calls, speed dialing and other features.

Volume control

There are several ways to control the volume of your phone.

Adjust volume during a call

To adjust the earpiece volume during a call, press the Volume Up or Volume Down key.

Use the speakerphone

Your phone has a built-in speakerphone. To turn on the speakerphone, press the Speakerphone key. The speakerphone icon appears on the home screen when the speakerphone is on. To turn off the speakerphone, press the Speakerphone key again.

Note: If you press the Speakerphone key during an incoming call, you will answer the call.

Silence an incoming call

To silence the phone without answering the call press a Volume key or select Ignore.

To silence the phone and answer the call, press a Volume key or select Silence, then press the Send key.

Hold call

The Hold Call feature allows you to place incoming calls on hold until you are ready to answer them. See “Hold calls” on page 44.

Speed dialing

The Speed Dial feature allows you to assign a one- or two-digit shortcut to a contact. Before you can use speed dialing you must save a phone number as a contact and assign a speed dial location to it. See “Customize a number” on page 25.

To call a contact that has a speed dial location.

1.Enter the one- or two-digit speed dial location.

2.Press the Send key.

1-Touch dialing

The 1-Touch Dialing feature is the fastest way to speed dial a contact that has a speed dial location. See “1-Touch dialing” on page 44.

10 Volume control