La Crosse Technology WS-9046U instruction manual II. Function Keys, III. Setting the LCD Contrast

II.FUNCTION KEYS

The function keys are located on the front of the unit directly below the LCD (Liquid Crystal Display).

ALM/+ key

SET key

IN/HR key	WIND/RAIN/	OUT/MIN key
	SNZ key

III.SETTING THE LCD CONTRAST

1.Press and hold the SET button for 5 seconds.

2.“LCD” will show in the TIME LCD and the number setting will flash.

Note: There are 8 LCD contrast levels to choose from—“Lcd 0” is the lightest, and “Lcd 7” is the darkest.

3.Press and release the ALM/+ button to select the level you desire.

4.Press and release the SET button to confirm and advance to the Time Zone setting.

IV. TIME ZONE SETTING

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the TIME LCD and the number setting will flash.

3. Press and release the SET button again.

4. The time zone will flash in the DATE LCD.

5. Press and release the ALM/+ button to select your time zone.

Note: It is possible to select any time zone from –12 GMT to +12 GMT (for example to see the time in another country)

TIME ZONES

	GMT	0
	Atlantic	-4
EST;	Eastern	-5
CST;	Central	-6
MST;	Mountain	-7
PST;	Pacific	-8
ALA;	Alaska	-9
HAW;	Hawaii	-10

6.Press and release the SET button to confirm and advance to the Daylight Saving Time setting.

V. DAYLIGHT SAVING TIME (DST) SETTING

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the TIME LCD and the number setting will flash.

3. Press and release the SET button twice.

4. “DST” will appear in the DATE LCD and either “ON” or “OFF” will flash in the TIME LCD.

5.Press and release the ALM/+ button to select DST on or off. 5